Volume 21 (2024)
Volume 20 (2023)
Volume 19 (2022)
Volume 18 (2021)
Volume 17 (2020)
Volume 16 (2019)
Volume 15 (2018)
Volume 14 (2017)
Volume 13 (2016)
Volume 12 (2015)
Volume 11 (2014)
Volume 10 (2013)
Volume 9 (2012)
Volume 8 (2011)
Volume 7 (2010)
Volume 6 (2009)
Volume 5 (2008)
Volume 3 (2006)
Volume 2 (2005)
Volume 1 (2004)
Research note Reaction Engineering, Kinetics and Catalysts,
Studies on Main Properties of Ternary Blended Cement with Limestone Powder and Microsilica
Volume 4, Issue 1 , January 2007, Pages 3-13

Abstract
  The ternary system of Portland cement-microsilica-limestone has been studied by investigating its set and strength behaviours. A number of different cementitious systems comprised of 0, 10, 15, 20, 25, and 30% limestone powder and 0, 4, 6, 8, 10, 12, 14, and 16% microsilica were designed and prepared. ...  Read More

Full article Energy
Photocatalytic Degradation of PAHs Contaminated Soil in South Pars Economic and Energy Zone with TiO2 Nanocatalyst
Volume 4, Issue 1 , January 2007, Pages 14-20

Abstract
  Heterogeneous photocatalytic degradation of Polynuclear Aromatic Hydrocarbons (PAHs) contaminated soil in the Pars Economic and Energy Zone was carried out under laboratory conditions to evaluate the potential use of this technology for in situ remediation. Analysis of soil samples show that contaminated ...  Read More

Full article Separation Technology,
Recovery of Gold from Gold Plating Industry Wastewater Using an Agricultural Waste: Hard Shell of Apricot Stones
Volume 4, Issue 1 , January 2007, Pages 21-35

Abstract
  Activated carbons are extremely versatile adsorbents for major industrial significance, especially for metal ions recovery from wastewaters. In this study, the activated carbon prepared from the hard shell of apricot stones, an agricultural solid, which was used for the gold recovery from gold-plating ...  Read More

Research note Process Control and Engineering, Process Safety, HSE
Study of Carbon Black Production with Optimized Feed to Predict Product Particle Size
Volume 4, Issue 1 , January 2007, Pages 36-42

Abstract
  Carbon black or soot is a carbon rich material which is widely used as a modifier and filler. Usually carbon black is produced via thermal decomposition of heavy hydrocarbons. This process is too complex to be modelled fundamentally. In this study, the effect of reaction feed composition on the soot ...  Read More

Full article Biomedical and Biotechnology,
Application of Bioaugmentation Technology to Improve the Activated Sludge Treatment Process in Removal of Aromatic Compounds
Volume 4, Issue 1 , January 2007, Pages 43-53

Abstract
  This investigation was designed to evaluate the effects of bioaugmentation on maintaining the system stability under shock loading conditions, standardizing the effluent, and improving the sludge settlement. In this study, phenol was chosen as a model of mono-aromatic compounds which are found commonly ...  Read More

Research note Process Control and Engineering, Process Safety, HSE
Synthesis and Seeding Time Effect on the Performance of Nanostructure Sodalite Membranes
Volume 4, Issue 1 , January 2007, Pages 54-70

Abstract
  > Secondary growth technique was successfully applied for the synthesis of nanostructure sodalite membranes with vacuum seeding on tubular α-Al2O3 supports. In the seeding process, a thin, uniform and continuous seeding layer was closely attached to the support external surface by the pressure ...  Read More